It didn’t matter that the difference between the two readings had no effect whatsoever on the circuit in question, you had a cool multimeter, and you could measure down to 0.01 of a volt.

Ensure the circuit or device under test is powered on, then probe across the component to be measured for the frequency. In closing Deciding on the best multimeter can be a daunting task.

A digital multimeter is an indispensable tool for testing, diagnosing, and troubleshooting electrical circuits, components, and devices. The first digital multimeter was introduced in the late ...

Short-circuit current. This exercise requires two meters—one the DUT (device under test) and another to measure current. On the Vf function and/or ohmmeter function, determine how much current is ...

Use a multimeter to test for a break in an electrical circuit. The meter measures resistance, and there are only two outcomes. Either the circuit is broken ...

Using alligator clip accessories on the test leads is often best for securing test leads in place. Energize the circuit, and the amperage value appears on the display. TIP #11: If DC current or ...

To test it, set the multimeter to measure voltage. Insert a probe into each slot and read the line voltage measurement. A properly working outlet gives a reading of 110 to 120 volts.

This multimeter comes with a 1-year limited warranty. How to use a multimeter. ... It’s suitable for testing wall outlets, wires, circuits, batteries, car batteries, etc.

For example, if a circuit required the use of a transistor, ... For demonstration purposes, I decided to use my meter to actually test a 200 K ohm resistor. The resistor tested at 197.6 ohms.

Touch the red test lead to that connection and the meter should again read slightly more than 12 volts. You’ve just proved that voltage is flowing through that cable.